Throw a cup

A simple handleless cup that flares a little toward the rim. The faint guide on the wheel shows the shape; you get the right amount of clay.

Step 1 of 13: Center the clay

    Water: good

    Tap to start, then press and hold the clay to center it.

    Clay

    Clay amount (free throw)

    (settings, shelf, streak and badges, kept only in this browser)

    The guide shape, side view

    The cup in this game

    A simple handleless cup that flares a little toward the rim. Pull three times, then let the top lean out just a touch.

    Height9 cm (3.5 in)
    Widest point8 cm (3.1 in)
    Wall to aim for0.5 cm
    Clay you start with184 cm³
    Clay left in the finished form103 cm³
    Added partsNone
    Difficulty hereEasy

    Sizes are the game's guide shape, rounded; real pots in this style vary. Inches use 1 in = 2.54 cm (NIST Handbook 44, Appendix C). The clay you start with is the finished volume plus about 40% for trimming and the slurry that comes off your hands.

    Steps for this shape

    1. Center. You start with about 184 cm³ of clay. Hold it on a fast wheel until the wobble is gone.
    2. Open. Press down to a floor about 1.1 cm thick (the extra is trimmed later), then drag out to a floor about 5.5 cm across.
    3. Pull. Pull the wall up to about 9 cm. Aim for walls near 0.5 cm thick: thinner looks fine but slumps first.
    4. Shape. Lean the top out to about 8 cm across with the rib.
    5. Finish. Level the rim with the needle, wire it off and trim a foot.

    Glazes to try

    Any of the 50 glazes works; these suit the cup.

    • Speckled mintPale mint with dark specks.
    • Lava flowOrange that pours over a dark base in thick tongues.
    • Copper lusterPolished copper with warm reflections.
    • Clear glossA glassy clear coat: the clay color and every throwing line show through.