Throw a cylinder

The classic practice form: straight up, even walls. The faint guide on the wheel shows the shape; you get the right amount of clay.

Step 1 of 13: Center the clay

    Water: good

    Tap to start, then press and hold the clay to center it.

    Clay

    Clay amount (free throw)

    (settings, shelf, streak and badges, kept only in this browser)

    The guide shape, side view

    The cylinder in this game

    The classic practice form: straight up, even walls. Every pull should end at the rim; collar slightly to keep it from flaring.

    Height15 cm (5.9 in)
    Widest point9 cm (3.5 in)
    Wall to aim for0.5 cm
    Clay you start with370 cm³
    Clay left in the finished form235 cm³
    Added partsNone
    Difficulty hereEasy

    Sizes are the game's guide shape, rounded; real pots in this style vary. Inches use 1 in = 2.54 cm (NIST Handbook 44, Appendix C). The clay you start with is the finished volume plus about 40% for trimming and the slurry that comes off your hands.

    Steps for this shape

    1. Center. You start with about 370 cm³ of clay. Hold it on a fast wheel until the wobble is gone.
    2. Open. Press down to a floor about 1.2 cm thick (the extra is trimmed later), then drag out to a floor about 8 cm across.
    3. Pull. Pull the wall up to about 15 cm. Aim for walls near 0.5 cm thick: thinner looks fine but slumps first.
    4. Shape. Keep the wall straight: run the rib up the outside to smooth it.
    5. Finish. Level the rim with the needle, wire it off and trim a foot.

    Glazes to try

    Any of the 50 glazes works; these suit the cylinder.

    • Clear glossA glassy clear coat: the clay color and every throwing line show through.
    • Black and rustGlossy black that breaks to rusty brown on the rim and ridges.
    • Speckled mintPale mint with dark specks.
    • Cream and cocoaCream on top, cocoa brown below, with a dark line where they overlap.