Throw a jar with lid

A round storage jar with a matching knobbed lid. The faint guide on the wheel shows the shape; you get the right amount of clay.

Step 1 of 13: Center the clay

    Water: good

    Tap to start, then press and hold the clay to center it.

    Clay

    Clay amount (free throw)

    (settings, shelf, streak and badges, kept only in this browser)

    The guide shape, side view

    The jar with lid in this game

    A round storage jar with a matching knobbed lid. Keep the rim level with the needle so the lid sits flat.

    Height13 cm (5.1 in)
    Widest point13.2 cm (5.2 in)
    Wall to aim for0.5 cm
    Clay you start with418 cm³
    Clay left in the finished form270 cm³
    Added partsa lid
    Difficulty hereEasy

    Sizes are the game's guide shape, rounded; real pots in this style vary. Inches use 1 in = 2.54 cm (NIST Handbook 44, Appendix C). The clay you start with is the finished volume plus about 40% for trimming and the slurry that comes off your hands.

    Steps for this shape

    1. Center. You start with about 418 cm³ of clay. Hold it on a fast wheel until the wobble is gone.
    2. Open. Press down to a floor about 1.2 cm thick (the extra is trimmed later), then drag out to a floor about 8.2 cm across.
    3. Pull. Pull the wall up to about 13 cm. Aim for walls near 0.5 cm thick: thinner looks fine but slumps first.
    4. Shape. Grab the wall where the form is widest (about 13.2 cm across) and drag it out slowly.
    5. Finish. Level the rim with the needle, wire it off and trim a foot, then make a lid that fits the rim.

    Glazes to try

    Any of the 50 glazes works; these suit the jar with lid.

    • Honey amberTranslucent amber that turns dark honey in every groove.
    • Sage matteMuted green-gray, calm and dry.
    • Copper dripGreen with red flashes running down where it is thick.
    • Olive celadonTranslucent olive, like old green glass.