Throw a bud vase

A small vase with a narrow neck for one stem. The faint guide on the wheel shows the shape; you get the right amount of clay.

Step 1 of 13: Center the clay

    Water: good

    Tap to start, then press and hold the clay to center it.

    Clay

    Clay amount (free throw)

    (settings, shelf, streak and badges, kept only in this browser)

    The guide shape, side view

    The bud vase in this game

    A small vase with a narrow neck for one stem. Collar hard near the top; the neck only needs room for one stem.

    Height13 cm (5.1 in)
    Widest point8.4 cm (3.3 in)
    Wall to aim for0.4 cm
    Clay you start with183 cm³
    Clay left in the finished form102 cm³
    Added partsNone
    Difficulty hereEasy

    Sizes are the game's guide shape, rounded; real pots in this style vary. Inches use 1 in = 2.54 cm (NIST Handbook 44, Appendix C). The clay you start with is the finished volume plus about 40% for trimming and the slurry that comes off your hands.

    Steps for this shape

    1. Center. You start with about 183 cm³ of clay. Hold it on a fast wheel until the wobble is gone.
    2. Open. Press down to a floor about 1.1 cm thick (the extra is trimmed later), then drag out to a floor about 5.2 cm across.
    3. Pull. Pull the wall up to about 13 cm. Aim for walls near 0.4 cm thick: thinner looks fine but slumps first.
    4. Shape. Grab the wall where the form is widest (about 8.4 cm across) and drag it out slowly.
    5. Collar. Squeeze the top in to a neck about 2.6 cm across. Each squeeze thickens the wall, so you can pull it again.
    6. Finish. Level the rim with the needle, wire it off and trim a foot.

    Glazes to try

    Any of the 50 glazes works; these suit the bud vase.

    • Pearl lusterWhite with a rainbow shimmer that shifts as it turns.
    • Rust stripesCream with a few wide rust-brown bands.
    • Forest greenDeep bottle green.
    • White crackleA web of fine dark crazing lines on glossy white.