Throw a saucer
A small plate to sit under a cup. The faint guide on the wheel shows the shape; you get the right amount of clay.
Step 1 of 13: Center the clay
Tap to start, then press and hold the clay to center it.
(settings, shelf, streak and badges, kept only in this browser)
This browser can't vibrate (iPhones can't), so big moments give a small screen shake instead.
The saucer in this game
A small plate to sit under a cup. Open wide, then flare the short wall out with the rib.
| Height | 2.2 cm (0.9 in) |
|---|---|
| Widest point | 16 cm (6.3 in) |
| Wall to aim for | 0.5 cm |
| Clay you start with | 161 cm³ |
| Clay left in the finished form | 87 cm³ |
| Added parts | None |
| Difficulty here | Easy |
Sizes are the game's guide shape, rounded; real pots in this style vary. Inches use 1 in = 2.54 cm (NIST Handbook 44, Appendix C). The clay you start with is the finished volume plus about 40% for trimming and the slurry that comes off your hands.
Steps for this shape
- Center. You start with about 161 cm³ of clay. Hold it on a fast wheel until the wobble is gone.
- Open. Press down to a floor about 1.2 cm thick (the extra is trimmed later), then drag out to a floor about 9 cm across.
- Pull. Pull the wall up to about 2.2 cm. Aim for walls near 0.5 cm thick: thinner looks fine but slumps first.
- Shape. Grab the wall where the form is widest (about 16 cm across) and drag it out slowly.
- Finish. Level the rim with the needle, wire it off and trim a foot.
Glazes to try
Any of the 50 glazes works; these suit the saucer.
- Cobalt blueDeep glossy blue that goes almost black where it pools.
- Rose pinkGlossy pink with a deeper rose edge.
- Sea-glass cracklePale aqua glass with a crackle that catches the light.
- Mustard and tealMustard above, teal below.