Throw a bottle
A cylinder bottle with a long narrow neck. The faint guide on the wheel shows the shape; you get the right amount of clay.
Step 1 of 13: Center the clay
Tap to start, then press and hold the clay to center it.
(settings, shelf, streak and badges, kept only in this browser)
This browser can't vibrate (iPhones can't), so big moments give a small screen shake instead.
The bottle in this game
A cylinder bottle with a long narrow neck. Collar in steps: each squeeze thickens the neck so you can pull it again.
| Height | 22 cm (8.7 in) |
|---|---|
| Widest point | 10 cm (3.9 in) |
| Wall to aim for | 0.5 cm |
| Clay you start with | 402 cm³ |
| Clay left in the finished form | 258 cm³ |
| Added parts | None |
| Difficulty here | Hard |
Sizes are the game's guide shape, rounded; real pots in this style vary. Inches use 1 in = 2.54 cm (NIST Handbook 44, Appendix C). The clay you start with is the finished volume plus about 40% for trimming and the slurry that comes off your hands.
Steps for this shape
- Center. You start with about 402 cm³ of clay. Hold it on a fast wheel until the wobble is gone.
- Open. Press down to a floor about 1.1 cm thick (the extra is trimmed later), then drag out to a floor about 8.3 cm across.
- Pull. Pull the wall up to about 22 cm. Aim for walls near 0.5 cm thick: thinner looks fine but slumps first.
- Shape. Keep the wall straight: run the rib up the outside to smooth it.
- Collar. Squeeze the top in to a neck about 2.8 cm across. Each squeeze thickens the wall, so you can pull it again.
- Finish. Level the rim with the needle, wire it off and trim a foot.
Glazes to try
Any of the 50 glazes works; these suit the bottle.
- Black and rustGlossy black that breaks to rusty brown on the rim and ridges.
- Slate blue matteCool blue-gray stone.
- Lava flowOrange that pours over a dark base in thick tongues.
- Copper lusterPolished copper with warm reflections.